The Net is the Automation.
We bring people, systems and devices together.
NettedAutomation GmbH
Information & Communication Systems (NAICS)

back - menue - contact - search
news - solutions - standardization - seminars - marketing support
question & answers - discussion forum - glossary - links - about us


-> home > glossary > numbers

  • 1BASE5: IEEE 802.3 Physical Layer specification for a 1 Mb/s CSMA/CD local area network over two pairs of twisted-pair telephone wire.
  • 10BASE2: IEEE 802.3 Physical Layer specification for a 10 Mb/s CSMA/CD local area network over RG 58 coaxial cable.
  • 10BASE5: IEEE 802.3 Physical Layer specification for a 10 Mb/s CSMA/CD local area network overcoaxial cable (i.e., thicknet).
  • 10BASE-F: IEEE 802.3 Physical Layer specification for a 10 Mb/s CSMA/CD local area networkover fiber optic cable.
  • 10BASE-FB port: A port on a repeater that contains an internal 10BASE-FB Medium Attachment Unit (MAU) that can connect to a similar port on another repeater.
  • 10BASE-FB segment: A fiber optic link segment providing a point-to-point connection between two10BASE-FB ports on repeaters.
  • 10BASE-FL segment: A fiber optic link segment providing point-to-point connection between two10BASE-FL Medium Attachment Units (MAUs).

  • 10BASE-FP segment: A fiber optic mixing segment, including one 10BASE-FP Star and all of the attached fiber pairs.
  • 10BASE-FP Star: A passive device that is used to couple fiber pairs together to form a 10BASE-FP segment. Optical signals received at any input port of the 10BASE-FP Star are distributed to all of its output ports (including the output port of the optical interface from which it was received). A 10BASE-FP Star is typically comprised of a passive-star coupler, fiber optic connectors, and a suitable mechanical housing
  • 10BASE-T: IEEE 802.3 Physical Layer specification for a 10 Mb/s CSMA/CD local area network over two pairs of twisted-pair telephone wire.
  • 100BASE-FX: IEEE 802.3 Physical Layer specification for a 100 Mb/s CSMA/CD local area net-work over two optical Þbers.
  • 100BASE-T: IEEE 802.3 Physical Layer specification for a 100 Mb/s CSMA/CD local area network.
  • 100BASE-T2: IEEE 802.3 specification for a 100 Mb/s CSMA/CD local area network over two pairsof Category 3 or better balanced cabling.
  • 100BASE-T4: IEEE 802.3 Physical Layer specification for a 100 Mb/s CSMA/CD local area net-work over four pairs of Category 3, 4, and 5 unshielded twisted-pair (UTP) wire.
  • 100BASE-TX: IEEE 802.3 Physical Layer specification for a 100 Mb/s CSMA/CD local area net-work over two pairs of Category 5 unshielded twisted-pair (UTP) or shielded twisted-pair (STP) wire.
  • 100BASE-X: IEEE 802.3 Physical Layer specification for a 100 Mb/s CSMA/CD local area networkthat uses the Physical Medium Dependent (PMD) sublayer and Medium Dependent Interface (MDI) of theISO/IEC 9314 group of standards developed by ASC X3T12 (FDDI).
  • 1000BASE-CX: 1000BASE-X over specialty shielded balanced copper jumper cable assemblies.

  • 1000BASE-LX: 1000BASE-X using long wavelength laser devices over multimode and single-modeÞber.
  • 1000BASE-SX: 1000BASE-X using short wavelength laser devices over multimode Þber.
  • 1000BASE-T: IEEE 802.3 Physical Layer specification for a 1000 Mb/s CSMA/CD LAN using four pairs of Category 5 balanced copper cabling.
  • 1000BASE-X: IEEE 802.3 Physical Layer specification for a 1000 Mb/s CSMA/CD LAN that uses a Physical Layer derived from ANSI X3.230-1994 (FC-PH) [B19] 9 .
  • 10BROAD36: IEEE 802.3 Physical Layer specification for a 10 Mb/s CSMA/CD local area network over single broadband cable.




The Net is the Automation.
© 2000-2002 NettedAutomation
composed by JohnBlack '01

back - menue - contact - search
news - solutions - standardization - seminars - marketing support
question & answers - discussion forum - glossary - links - about us