|
Standards for Power Systems
Comprehensive Seminars and Training for IEC Communication Standards:
IEC 61850, IEC 61400-25, IEC 60870-5, IEC 60870-6, MMS, CIM, DNP3, ... Protection, Control, Monitoring, Engineering, Maintenance, Sevice, ...
Trainer: Karlheinz Schwarz
You'll get up-to-date, first-hand & neutral, vendor independent
knowledge, experience, Do's and Don't's and guidance from the editors ...
the fastest start in application and implementation of
traditional and advanced information and communication systems
contact us for more details ...
Do you want to receive our newsletter on standards and related issues? send us an email
Applications covered by these standards:
Automation, Protection, Monitoring, Design, Engineering, RTU, Data concentrators,
Gateways, Information collection and distribution management, SCADA, ...
for the electric power delivery system, for gas transmission and distribution, for water ....
Our training courses cover all aspects of the information and information exchange for the utility industry. The focus is on the basics and details of traditional and advanced standards-based solutions ... depending on your needs!
There is a need for training: "...between 40 and 50 percent of today's technicians and operators in the U.S. energy field will be eligible for retirement by 2012" more ... The basics of the currently huge installed base of traditional communication systems needs to be maintained by people that may never have heard about these solutions!
We offer a wide range of training courses for traditional and advanced solutions [flyer, pdf]:
1. Basics of information and communication technologies for utility applications
|
- Serial communication
- Ethernet for non-realtime and realtime applications
- TCP/IP or process information exchange
- ...
|
General introduction in the requirements and solutions in use today and tomorrow
contact us for more details on basics ...
|
2. Communication for RTUs
|
- IEC 60870-5-101 and -104
- DNP3
- Modbus
- IEC 61850, IEC 61400-25
- ...
|
Comprehensive seminar and hands-on training for vendors and users
(sample program 101/104)
contact us for more details on RTUs...
|
3. Communication for Protection
|
- IEC 60870-5-103
- Profibus
- Modbus
- ...
|
Comprehensive seminar for vendors and users
contact us for more details on protection ... |
4. IEC 61850 and IEC 61400-25 -> THE MOST DEMANDED EDUCATION
|
- Basic Knowledge of IEC 61850
- Benefits of using IEC 61850
- Advanced Knowledge of IEC 61850
- IEC 61850 for substation automation
- Process bus
- System design and engineering tools
- IED design and engineering tools
- Maintenance and service
- IEC 61850 and MMS communication
- Power generation (Hydro, Wind, DER, ...)
- Communication outside the substation
- System level applications
- Products and projects
- Conformance and INTEROPERABILITY requirements
- ...
|
The most comprehensive Seminar and Training attended by 1000+ experts all over:
You'll get up-to-date, first-hand & neutral knowledge, experience, Do's and Don't's and guidance from the editors ... the fastest start in application and implementation
sample program for two day IEC 61850 Seminar
seminar details, locations, dates, and registration information...
IEC 61850 introduction
|
5. Control center information and communication, CIM, ...
|
|
Comprehensive introduction into the standards, and harmonization issues with IEC 61850
seminar modules (S-06xx)
sample program for a one-day IEC 61850 and one-day CIM seminar
contact us for more details on CC communication...
|
6. Inter-control Center Communication (IEC 60870-6-TASE.2; ICCP)
|
- Basics
- Services and protocol
- Examples
- ...
|
Comprehensive introduction into the standards
contact us for more details on TASE.2...
special magazine etz Report 32
|
7. MMS (Manufacturing Message Specification, ISO 9506)
|
- Basics
- Services and protocol
- Examples
- ASN.1 and BER
- Hands-on
- MMS applications in IEC 61850 and IEC 61400-25
- MMS application in IEC 60870-6 TASE.2 (ICCP)
- ...
|
MMS is the basis for IEC 60870-6 TASE2 (ICCP), IEC 61850 and IEC 61400-25-4 Annex C
Comprehensive introduction into the standards and all details required to implement the protocol stacks for the above listed standards
seminar details on MMS...
MMS introduction
|
8. Webservices and other mappings for IEC 61400-25 (and IEC 61850)
|
The following optional mappings are incorporated in the FDIS (end of 2007):
- (full) Mapping of IEC 61950-7-2 ACSI and Information Models (LD, LN, DATA, DA, …) to new webservices
- (full) Mapping according to IEC 61850-8-1 MMS
- (subset) Mapping to OPC XML DA
- (small subset) Mapping to IEC 60870-5-104
- (small subset) Mapping to DNP3
|
Comprehensive introduction into the standards
contact us for more details on mappings ...
|
9. Fieldbus
|
- IEC 61158
- EN 50170
- Profibus DP PA FMS ...,
- ProfiNet
- CAN in Automation
- PowerLink
- EtherCat
- ...
|
Comprehensive introduction into the standards
seminar details Fieldbusses...
|
10. Wireless communication, LAN, WAN
|
- Zigbee
- Ruggedized Ethernet
- BACNet
- Switching, Cabeling
- ...
|
Comprehensive introduction into the standards
seminar details wireless ...
|
11. The utility information exchange and communication infrastructure
|
- The network for the smart grid of the future
- The critical infrastructure
- ...
|
Planning the future of an utility-wide seamless communication solution to support any kind of communication (operational and non-operational information)
contact us for more details critical infrastructure ...
|
[flyer, pdf]
General Request for Quote (RFQ) for Seminars and Training courses ...
|
|